RoofjackRD Pipe Flashing
RoofjackRD Pipe Flashing
Manufactured from EPDM or silicone rubber, Roofjack™ RD is compounded for maximum resistance to ozone, UB light, & temperature extremes.
Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation
Roofjack™ RD are well-marked so they can easily be cut with shears to fit exactly the pipe size used.
Roofjack™ RD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.

RoofjackRD Information

 

PIPE SIZE BASE DIAMETER COLOR MATERIAL
#1

1/4” -2-1/2”

4.75” (120.7mm)

Black/Gray EPDM & Red/Gray Silicone

#2

1-3/4”-3”

6.21” (157.7mm)

Black/Gray EPDM & Red/Gray Silicone

#3

1/4”-5”

7.74” (196.6mm)

Black/Gray EPDM & Red/Gray Silicone

#4

3”-6-1/4”

9.26” (235.2mm)

Black/Gray EPDM & Red/Gray Silicone

#5

4-1/4”-7-3/4”

10.75” (273.0mm)

Black/Gray EPDM & Red/Gray Silicone

#6

5” – 9”

12.50” (317.5mm)

Black/Gray EPDM & Red/Gray Silicone

#7

6” – 11”

14.60” (370.8mm)

Black/Gray EPDM & Red/Gray Silicone

#8

7” – 13”

16.5” (419.1mm)

Black/Gray EPDM & Red/Gray Silicone

#9

9” – 19”

25.25” (641.1mm)

Black/Gray EPDM & Red/Gray Silicone

 

EPDM 500 SILICONE

Advanced Ozone Resistance Tested to…

70 hr @500 pphm

70 hr @500 pphm

High Temperature Resistance

Tested to Intermittent

Continuous

+135ºC (+275ºF)

+100ºC (+212ºF)

+260ºC (+500ºF)

+225ºC (+500ºF)

Low Temperature Resistance tested to…

-55ºC (-65ºF)

-74ºC (-100ºF)

Tensile Set Maximum…

Compression Set Maximum…

10MPa (1450psi)

25%

5MPa (700psi)

50%