GuardianX Series
Sure Snap SL175
The1-3/4″ Snap Seam Panel is a Standing Seam Metal Roof Panel that has all fasteners concealed for a sleek look and most importantly incredible strength and weather resistance. The 1-¾” Snap Seam Panel can be installed over a solid substrate or open purlin system. This Metal Roofing – Steel Roofing Panel uses a clip system that allows the panel to float for the expansion and contraction of the steel. When using an 18ga Clip, this panel has incredible wind resistance. This Standing Seam Metal Roof Panel comes in a variety of standard widths and colors, but can be customized to the needs that you are looking for. This panel can be roll formed on site or at our facility in Rigby, Idaho. Rollforming on site can help reduce shipping costs and damage to the panels in the shipping process.
Highlights
- Highest Quality Materials Used
- Proven Reliability and Strength
- Concealed Fasteners and Contraction Clip System
- Custom Widths available from 8″ to 24″
- Recommended Minimum Slope 2:12 Pitch
- Incredible Wind Resistance using 18ga Clips
- Does not require a seamer for installation.
- Protective Film can be applied prior to rollforming for added protection.
- An optional Hot Melt In-seam Sealant is available.
- With or Without Striations or Box Ribs
- Up to 40 Year Limited Paint Warranty Available
- Watertight Warranty Available
- SMP 26ga Grade 50 Steel (50,000psi)(Siliconized Modified Polyester Paint)
- Kynar 500®/Hylar 5000®/PVDF Painted Steel Available in 26ga & 24ga, 22ga Grade 50 (50,000psi)
- Manufactured in Rigby, Idaho or on Job Site
- Please refer to 1-3/4” Snap Seam Details Section to see optional finishes and gauges available.
- Please refer to 1-3/4” Snap Seam Details Section for Specifications.
- Oil Canning is not cause for rejection.
Details
Industry Uses
Residential
Post Frame
Agricultural
Light Commercial
Commercial
Industrial
Applications
Roofing
Wall
Soffit
Fascia
Ceiling
Interior
Features
Rib Height: 1 3/4″
Fixed Clips
Coverage: Standard Widths: 10″, 12″, 14″, 16″, 18″
Custom Widths: From 8″ to 24″
Recommended Minimum Slope: 3/4:12 Pitch w/ Butyl
Installation
Concealed Fastening System
Solid Substrate
Open Purlin System up to 24″ Span*
Gauges Available
Standard Gauge(s) 24ga
Optional Gauge(s) 22ga
Panel Lengths
3′ to 150′
Standard Finish
Kynar 500®/Hylar 5000®/PVDF
Optional Finishes
Kynar 500®/Hylar 5000®/PVDF Metallic
Galvalume®
Galvanized
Cold Rolled
Bonderized
Warranties
SMP up to 40 year Paint Warranty*
Kynar 500® up to 35 year Paint Warranty*
*Oil Canning is not a cause for rejection
Color Selection
Download Center
Product Info
Accessories
Under X Underlayment
Fasteners (Metal to Wood)
#10 HWH 1/4″ Micro-Bit KiwikSeal WoodBinder
#10 CHWH 5/16″ Micro-Bit ZXL WoodBinder
CHWH 5/16″ Micro-Bit ZXL WoodBinder
Closures & Venting
Pipe Flashings
Sealants & Tapes
Novaflex Metal Roofing Sealant
Coil & Flat Panel
Color Guides
Warranty Info
Technical Info (TIS)
Sure Snap SL175 Tech Sheet